Description of Production:
Product Name: Metallographic rubber powder / curing agent
Product alias: cold buried resin powder / acrylic powder; cold buried resin water / metallographic curing agent
Material Description: Imported acrylic resin
Storage requirements: save under natural ventilation
Material number, product name, packaging state
G91000 metallographic powder 1KG/bottle powder

G90800 metallographic curing agent 800ml / bottle of liquid

Features: 

After 5-10 minutes, it can be cured into a hard transparent slice, and the slice can be polished, polished, etc. It has the advantages of low heat release, low heat shrinkage, good weather resistance, etc., suitable for the electronics industry. In particular, the PCB industry uses micro-slice materials.

Instructions for use: 

1. The ratio of resin powder to resin water is 1.4:1 (weight ratio)
2. Prepare a container and a stir bar and pour the appropriate amount of resin powder into the mixing cup.
3. Add an appropriate amount of resin water and stir it evenly with a stir bar (too fast to produce bubbles)
4. After mixing evenly (into a milky white thick liquid), pour into the slice mold
5. The curing is completed after about 5-10 minutes (the intermediate generation temperature is a natural reaction phenomenon)

The ratio can be finely adjusted according to the specific requirements. The higher the ratio of the powder, the faster the curing speed and the relative fluidity is worse! The effect is the opposite.

Sorry  o "Specifications", you can view other services.

Sorry  o "related issues", you can view other services.